|
13 May 2005, 09:24
|
#1
|
TashTastic
Join Date: Jul 2001
Posts: 1,354
|
New computer causing problems
Hello. I built a new computer. All is good, except for when i try and install windows. Everytime i have to reformat the drive before windows will install it gets to 4% and the picture disappears but the computer keeps running. I suspected it was a problem with the graphics card, so i changed that for another one to see if it would make any difference, it doesnt
Im really stuck for ideas on this. Any suggestions (or a solution) would be brilliant.
Comp specs
- Gigabyte GV-3D1 with GA-K8NXP-SLI. Geforce Dual 6600GT Chip 256MB Graphics Accelerator bundled with GA-K8NXP-SLI motherboard
- AMD (Winchester) Athlon 64bit 3200+ 939pin 512kb L2cache 90nm Retail Boxed Processor
- Maxtor 6B200M0 Diamondmax 10 200GB 7200rpm Serial ATA150 8mb Cache - Oem
- Corsair (VS1GBKIT400C3) 1024MB (2 x 512MB Matched Pair), DDR400 / PC3200, non-ECC, Unbuffered, CL3, Memory Modules
Many thanks
Madina
__________________
Its only gay if you enjoy it!
|
|
|
13 May 2005, 12:36
|
#2
|
Friendly geek of GD :-/
Join Date: Nov 2000
Location: On my metal roid
Posts: 923
|
Re: New computer causing problems
You tried formatting the HDD without windows? From external tools?
Or recreated the partition using Partition Magic maybe?
Hm, use another boot cd? User another windows CD?
Is it Windows Server 2003? Someone told me something similar...
Also make sure, the boot sector isn't occupied by some linux.
No other ideas for now....
__________________
[ »] Entropy increases! :-/
|
|
|
13 May 2005, 17:47
|
#3
|
TashTastic
Join Date: Jul 2001
Posts: 1,354
|
Re: New computer causing problems
This is a brand new hdd and im installing windows onto it. Windows requires you to format it before you can install the OS. So basically all i can do is look at the bios and watch the windows setup start. That is all that happens.
__________________
Its only gay if you enjoy it!
|
|
|
14 May 2005, 12:23
|
#4
|
Let battle commence
Join Date: Feb 2002
Location: England
Posts: 732
|
Re: New computer causing problems
Tried a diff version of Windows (I'm guessing your trying with XP there)
Other suggestion, try booting the machine from something like a Knoppix Linux LiveCD - see if it actually boots all the way and if its a problem with Windows or the machine.
Likelyhood is its Windows being a nuciance. Is it a SATA based drive? Could it be windows unable to work out how to use the controller? (was there a driver disk with the board - to insert when windows setup starts and says "Press F6 to add extra drivers".
__________________
Mit
http://tim.igoe.me.uk - Development Blog
Whats on TV now - UK TV Guide
<Mendosa> mit is a cute cudlly toy that will be in the shops by christmas
<mig-work> ur now my eternal fav pa god
<Squiz> i name thee, Sir Mit
<Zeus> u my friend are a true gamer I knew u were
|
|
|
15 May 2005, 19:36
|
#5
|
TashTastic
Join Date: Jul 2001
Posts: 1,354
|
Re: New computer causing problems
Yes it is a SATA drive. I have been pressing F6 each time and installing the controller. I cant try with any other OS as i dont have any
I hadnt thought that it could be the controller casuing the problem. I shall look for an alternative controller for the hdd (if pos)
__________________
Its only gay if you enjoy it!
|
|
|
15 May 2005, 20:11
|
#6
|
Let battle commence
Join Date: Feb 2002
Location: England
Posts: 732
|
Re: New computer causing problems
I've seen issues with installing WinXP onto a SATA controller.
If you have a working machine, you can try "slipstreaming" service pack 2 and producing a new bootable CD with SP2 pre installed. This might help with the install.
Other than that, it could prove fun.
__________________
Mit
http://tim.igoe.me.uk - Development Blog
Whats on TV now - UK TV Guide
<Mendosa> mit is a cute cudlly toy that will be in the shops by christmas
<mig-work> ur now my eternal fav pa god
<Squiz> i name thee, Sir Mit
<Zeus> u my friend are a true gamer I knew u were
|
|
|
16 May 2005, 08:27
|
#7
|
Born Sinful
Join Date: Nov 2000
Location: Loughborough, UK
Posts: 4,059
|
Re: New computer causing problems
I have an 3 SATA drives in my new pc, and I installed windows fine.
However, I used the latest version of XP Pro setup which has SP2 integrated into the install which may well have been why it worked. I also did not need to do the F6 thing as it detected my drives fine without it - have you tried to see if yours are?
If it helps, the SATA controller I'm using for all three harddisks is the nVidia one (out of nVidia and Silicon Image controllers available) on my Asus A8N-SLI Deluxe.
__________________
Worth dying for. Worth killing for. Worth going to hell for. Amen.
|
|
|
16 May 2005, 10:55
|
#8
|
Rawr rawr
Join Date: Dec 2000
Location: Upside down
Posts: 5,300
|
Re: New computer causing problems
I have two SATA drives, and my Windows install would stop too saying it couldn't find a disk it could install too.
Turning off SATA RAID in the BIOS did the trick.
However, since you only have one disk, and you install actually detects the disk, I doubt that would be it.
__________________
"Yay"
|
|
|
16 May 2005, 14:17
|
#9
|
mmm.. pills
Join Date: Apr 2000
Location: Australia
Posts: 2,152
|
Re: New computer causing problems
On an unrelated note, I've noticed odd behaviour while installing XP in the past. My HDD's are running from onboard RAID controllers. My original pre-SP1 cd will detect the controller & HDDs just fine, but I made a copy of my install cd with SP2 slipstreamed and it refuses to see the controller or drives, odd.
|
|
|
6 Jun 2005, 17:56
|
#10
|
Powering your life...
Join Date: Dec 2004
Location: Dublin
Posts: 400
|
Re: New computer causing problems
What about updating the bios? from aa floppy? can be done... bit complicated though..
__________________
Reality is only a perception.
|
|
|
7 Jun 2005, 12:42
|
#11
|
TashTastic
Join Date: Jul 2001
Posts: 1,354
|
Re: New computer causing problems
Its ok its all sorted now. Also i dont plan on flashing the bios
__________________
Its only gay if you enjoy it!
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
|
All times are GMT +1. The time now is 02:40.
| |